Ricoh OR-C1 Field Service Manual page 451

No. Type
The machine does not detect a correct signal from the paper position detection unit
HP sensor while paper position sensor unit motor is operating. The 1st detection
failure issues a jam error, and the 2nd failure issues this SC code.
• Defective paper position sensor unit motor
• Loosen connection
- -
• Motor overload
• Defective paper position detection unit HP sensor
1. Replace the paper position detection unit HP sensor.
2. Replace the paper position sensor unit motor.
No. Type
793-
B Stapler unit motor error with 1-bin tray (D586)
11
794-
D Stapler unit motor error without 1-bin tray (D586)
11
The machine does not detect a correct signal from the paper position detection unit
HP sensor while the stapler unit motor is operating. The 1st detection failure issues
a jam error, and the 2nd failure issues this SC code.
• Defective paper position sensor unit motor
• Loosen connection
- -
• Motor overload
• Defective paper position detection unit HP sensor
1. Replace the paper position detection unit HP sensor.
2. Replace the paper position sensor unit motor.
No. Type
793-
B Shift roller motor error with 1-bin tray (D586)
12
794-
D Shift roller motor error without 1-bin tray (D586)
12
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call Conditions
3
93