Ricoh OR-C1 Field Service Manual page 340

6. Troubleshooting
Jam Code
SP
7-504-145 FIN Exit Motor (D589)
FIN Stack 1 Release
7-504-146
Motor (D589)
FIN Stack 2 Release
6
7-504-147
Motor (D589)
FIN Stopper Motor
7-504-148
(D589)
7-504-160 Entrance Sn:ON (D585)
7-504-161 Entrance Sn (D585)
7-504-162 FIN Entrance (D585)
7-504-163 Positioning Roller (D585)
338
Display
Stack feed-out belt HP sensor does not turn off
after the stack feed-out belt has moved from
its home position.
Stack feed-out belt HP sensor does not turn on
after the stack feed-out belt has returned to its
home position.
Stopper S HP sensor does not turn off after the
stopper S has moved from its home position.
Stopper S HP sensor does not turn on after the
stopper S has returned to its home position.
Lower clamp roller HP sensor does not turn off
after the lower clamp roller has moved from
its home position.
Lower clamp roller HP sensor does not turn on
after the lower clamp roller has returned to its
home position.
Bottom fence HP sensor does not turn off after
the bottom fence has moved from its home
position.
Bottom fence HP sensor does not turn on after
the bottom fence has returned to its home
position.
Paper does not reach the entrance sensor.
Paper stays at the entrance sensor.
Sensor does not detect paper.
Positioning roller HP sensor does not turn off
after the positioning roller has moved from its
home position.
Positioning roller HP sensor does not turn on
after the positioning roller has returned to its
home position.
Description
LCD
Display
R7-R11
R7-R11
R7-R11
R7-R11
R1
R1
R2
R1