Ricoh OR-C1 Field Service Manual page 439

No. Type
Shift tray motor error
The shift tray motor in the 1000-sheet finisher is not operating.
• Shift motor drive is obstructed (jammed paper, paper scraps, etc.)
• Shift motor harness loose, broken
• Shift tray HP sensor harness loose, broken
730 B
• Shift motor defective
• Shit tray HP sensor defective
1. Check the connections and cables for the components mentioned above.
2. Check for blockages in shift tray motor mechanism.
3. Replace the shift tray HP sensor and/or shift tray motor.
4. Replace the finisher main board.
No. Type
Exit motor error
The exit motor in the finisher is not operating.
• Exit motor drive is obstructed (jammed paper, paper scraps, etc.)
• The motor harness loose or broken
731 B
• Exit motor defective
1. Check for blockages in the exit motor mechanism.
2. Replace the exit motor.
3. Replace the finisher main board.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call Conditions
3
81