Ricoh OR-C1 Field Service Manual page 163

3. Cut out the part [A] on the back of the USB 2.0/SD slot with pliers or a similar tool, and route the
USB cable and ground wire through [A].
4. Install the right cover [B] of the USB2.0/SD Slot [C] (
5. Remove the optional booklet finisher from the left side of the machine (
6. Remove the controller cover [A] (
7. Remove the upper left cover. (
x 2).
x1), and then cut out the cover for the USB-A slots.
p.180 "Upper Left Cover")
USB2.0/SD Slot Type H (D594)
x 1).
2
161