Ricoh OR-C1 Field Service Manual page 297

40 Engine module download failed
Operation panel module
42
download failed
Stamp data module download
43
failed
Controller module download
44
failed
Electronic confirmation check
50
failed
Replace the update data for the module on the SD card
and try again, or replace the BCU board.
Replace the update data for the module on the SD card
and try again, or replace the LCDC.
Replace the update data for the module on the SD card
and try again, or replace the hard disks.
Replace the update data for the module on the SD card
and tray again, or replace controller board.
SD update data is incorrect. The data on the SD card is
for another machine. Acquire correct update data then
install again.
Firmware Update
5
295