Ricoh OR-C1 Field Service Manual page 570

4. Appendix: Service Program Mode Tables
Local Phone Number
161*
Not used
Connection Timing Adjustment: Incoming
162*
Not used
Access Point
163*
Not used
Line Connecting
164*
4
Not used
Modem Serial Number
173*
Not used
Retransmission Limit
174
Not used
FAX TX Priority
187*
Not used
Manual Polling
200
Not used
Regist: Status
Displays a number that indicates the status of the @Remote service device.
0: Neither the @Remote device nor Embedded RCG Gate is set.
1: The Embedded RCG Gate is being set. Only Box registration is completed. In this
status, @Remote device cannot communicate with this device.
201
2: The Embedded RCG Gate is set. In this status, the @Remote device cannot
communicate with this device.
3: The @Remote device is being set. In this status the Embedded RCG Gate cannot be
set.
4: The @Remote module has not started.
Letter Number
202*
Allows entry of the request number needed for the Embedded RCG Gate.
212