Ricoh OR-C1 Field Service Manual page 467

No. Type
Wireless LAN board error 2
The board that holds the wireless LAN board can be accessed, but the wireless
LAN board (802.11b or Bluetooth) itself cannot be accessed while the machine is
854 B
operating
• Wireless LAN board has been removed during machine operation.
Check the wireless LAN board is installed correctly.
No. Type
Wireless LAN board error 3
An error was detected for the wireless LAN board (802.11b or Bluetooth).
• Wireless LAN board defective
855 B
• Wireless board connection not tight
1. Check the connection.
2. Replace the wireless LAN/Bluetooth card.
No. Type
USB I/F Error
The USB driver is unstable and generated an error. The USB I/F cannot be used.
The USB driver can generate three types of errors: RX, CRC, and STALL errors.
Only the STALL error can generate this SC code.
857 B
• USB 2.0 disconnected
• Controller board defective
1. Check the connection.
2. Replace the controller board.
No. Type
Data encryption conversion error
858 A
A serious error occurred during data encryption.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call Conditions
3
109