Ricoh OR-C1 Field Service Manual page 333

Add a spacer (t = 0.5 to 0.8) between the hinge bracket (mainframe) and ADF left hinge, to lift the
left side of the ADF
-or-
Adjust the stepped height difference between the hinge bracket and scanner housing until it is
within 0 ±0.3 mm.
• This is necessary because skew occurs when the hinge bracket more than 0.3 mm lower than
the scanner housing.
Correcting Trapezoid Images
Procedure 1: Minor Adjustment of the Fusing Unit Height (front-to-rear)
Image Problems
6
331