Ricoh OR-C1 Field Service Manual page 523

6 Smoothing
7 Brightness
8 Contrast
9 Ind. Dot Erase
10 Text Erasure
SBU Version Display
4600
Displays the version number of the SBU.
1 SBU ID
2 GASBU-N ID
3 VSP5100 ID
4602 Scanner Memory Access
1 Scanner Memory Access
Selects the level of smoothing for originals that contain dithered
images.
[0 to 7 / 4 / 0 / step]
0: Default (Off) 7: Strongest
Sets the overall brightness of the image.
[1 to 255/ 128 /1]
1: Weakest 128: Default
Sets the overall contrast of the image.
[1 to 255/ 128 /1]
1: Weakest 128: Default
Sets the level of independent dot erasure to improve the
appearance of background.
[0 to 7/ 0 / 1 /step]
0: Default (Off) 7: Strongest
Sets the erasure level of textures. Set higher for stronger effect,
lower for weaker effect.
[0 to 2 / 0 / 1 /step]
0: Not activated
Note: This SP code exists for SP4580, SP4582 and SP4583
only.
[0 to 0xFF / 0 / 1]
[0 to 0xFF / 0 / 1]
[0 to 0xFF / 0 / 1]
Enables the read and write check for the SBU
registers.
System SP Tables-4
255: Strongest
255: Strongest
4
165