Ricoh OR-C1 Field Service Manual page 343

Jam Code
Display
SP
FIN Paper Exit Plate
7-504-199
Motor (D586)
FIN Staple Shift Motor
7-504-200
(D586)
FIN Tray Lift Motor
7-504-201
(D586)
7-504-202 FIN Staple Motor (D586)
FIN Stack Height SOL
7-504-203
(D586)
7-504-204 FIN Punch Motor (D586)
FIN Punch Movement
7-504-205
Motor (D586)
Description
Exit guide plate HP sensor does not turn off
after the guide plate has moved from its
position.
Exit guide plate HP sensor does not turn on
after the guide plate has returned to its
position.
Stapler HP sensor does not turn off after the
finisher stapler movement motor has turned
on.
Stapler HP sensor does not turn on after the
finisher stapler movement motor has turned
off.
Paper height sensor does not turn on after the
output tray has lifted up.
Paper height sensor does not turn off after the
output tray has moved down.
Corner stapler does not finish stapling after a
specified time.
Paper height sensor does not turn on after the
edge depressor has retracted from the stack.
Paper height sensor does not turn off after the
edge depressor has touched the top of the
stack.
Punch encoder sensor does not turn on/off
after the punch drive motor has turned on.
Paper position slide HP sensor does not turn
on/off after the paper position sensor slide
motor has turned on.
Punch movement HP sensor does not turn on/
off after the punch movement motor has
turned on.
Jam Detection
LCD
Display
R1-R2
R1-R2
6
R1-R2
R1-R2
R1-R2
R1-R2
R1-R2
341