Ricoh OR-C1 Field Service Manual page 565

RCG – C Registed DFU
This SP displays the Embedded RC Gate installation end flag.
21*
0: Installation not completed
1: Installation completed
Connect Type (N/M)
This SP displays and selects the Embedded RC Gate connection method.
23*
0: Internet connection
1: Dial-up connection
Cert. Expire Timing DFU
61*
Proximity of the expiration of the certification.
Use Proxy DFU
This SP setting determines if the proxy server is used when the machine communicates
62*
with the service center.
0: proxy server is used
1: proxy server is not used
Proxy Host
This SP sets the address of the proxy server used for communication between
Embedded RC Gate-N and the gateway. Use this SP to set up or display the customer
proxy server address. The address is necessary to set up Embedded RC Gate-N.
63*
• The address display is limited to 128 characters. Characters beyond the 128
character are ignored.
• This address is customer information and is not printed in the SMC report.
Proxy Port Number
This SP sets the port number of the proxy server used for communication between
Embedded RC Gate-N and the gateway. This setting is necessary to set up Embedded
64*
RC Gate-N.
• This port number is customer information and is not printed in the SMC report.
System SP Tables-5
4
207