Ricoh OR-C1 Field Service Manual page 446

3. Appendix: Service Call Conditions
No. Type
791 D
3
No. Type
792 B
No. Type
793-
B
01
794-
D
01
88
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
• Defective connector
• Broken harness
1. Check the connections between the bridge unit and the machine.
2. Install a new bridge unit.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
• Defective connector
• Defective harness
• Incorrect installation
1. Check the connections between the finisher and the machine.
2. Install a new finisher.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Front jogger motor error with 1-bin tray (D586)
Front jogger motor error without 1-bin tray (D586)