Ricoh OR-C1 Field Service Manual page 447

No. Type
The machine does not detect a correct signal from the front jogger fence HP sensor
while the front jogger motor is operating. The 1st detection failure issues a jam
error, and the 2nd failure issues this SC code.
• Defective front jogger motor
• Loosen connection
- -
• Motor overload
• Defective front jogger fence HP sensor
1. Replace the front jogger fence HP sensor.
2. Replace the front jogger motor.
No. Type
793-
B Rear jogger motor error with 1-bin tray (D586)
02
794-
D Rear jogger motor error 1-bin tray (D586)
02
The machine does not detect a correct signal from the rear jogger fence HP sensor
while the rear jogger motor is operating. The 1st detection failure issues a jam
error, and the 2nd failure issues this SC code.
• Defective rear jogger motor
• Loosen connection
- -
• Motor overload
• Defective rear jogger fence HP sensor
1. Replace the rear jogger fence HP sensor.
2. Replace the rear jogger motor.
No. Type
793-
B Pick-up roller contact motor error with 1-bin tray (D586)
03
794-
D Pick-up roller contact motor error without 1-bin tray (D586)
03
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call Conditions
3
89