Ricoh OR-C1 Field Service Manual page 472

3. Appendix: Service Call Conditions
No. Type
866 B
3
No. Type
867 D
No. Type
868 D
114
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SD card error 1: Recognition error
The SD card in the slot contains illegal program data.
• SD-card data is corrupted.
Use only SD cards that contain the correct data.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SD card error 2: SD card removed
The SD card in the boot slot when the machine was turned on was removed while
the machine power was on.
• The SD card is ejected from the slot.
1. Install the SD card.
2. Turn the main switch off and on.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SD card error 3: SD card access
An error occurred while an SD card was used.
• SD card not inserted correctly
• SD card defective
• Controller board defective
Note: If you want to try to reformat the SD card, use SD Formatter Ver 1.1.
1. Check the SD card is inserted correctly.
2. Replace the SD card.
3. Replace the controller board.