Ricoh OR-C1 Field Service Manual page 316

5. System Maintenance
SP5-857-017 Create a File on SD Card to Store a Log
This SP creates a 4 MB file to store a log on an SD card. However, this is not a completely empty file.
The created file will hold the number "2225" as the SCS key number and other non-volatile information.
Even if this SP is not executed, a file is created on the SD card when the first log is stored on the SD card
(it takes some time to complete this operation). This creates the possibility that the machine may be
switched off and on before the log can be created completely. If you execute this SP to create the log
file beforehand, this will greatly reduce the amount of time required to acquire the log information and
save onto the SD card. With the file already created on the SD card for the log file, the data only needs
to be recorded; a new log file does not require creation. To create a new log file, do SP5-857-012 to
delete the debug log data from the SD card. Then do SP5-857-017.
5
314