Ricoh OR-C1 Field Service Manual page 494

4. Appendix: Service Program Mode Tables
15 Junction Gate SOL1: ON
17 Junction Gate SOL1: OFF
20 Bridge Junction Gate SOL ON: Plain
Bridge Junction Gate SOL ON: Middle
21
Thick
22 Bridge Junction Gate SOL ON: Thick 1
23 Bridge Junction Gate SOL OFF: Plain
Bridge Junction Gate SOL OFF: Middle
4
24
Thick
25 Bridge Junction Gate SOL OFF: Thick 1
Fan Cooling Time Set
Adjust the rotation time for the fan motor (Fan for PSU, fusing, heater, controller box)
1950*
after a job end.
[10 to 600 / 10 / 1 sec]
Max Fusing Lamp Duty DFU
1991*
These SP codes are debugging tools.
1 Roller Center
2 Roller Ends
3 After Warming-up – Center
4 After Warming-up - Ends
Heater Forced Off After Printing
Adjusts the period of time the fusing fan is off after printing. After the final sheet exits the
1996*
fusing unit, the machine turns the fan off by setting the fusing temperature to reload
temperature.
[0 to 120/1/1 sec]
136
[-10 to 10 / 0 / 1mm /step]
The bridge junction gate solenoid turns on
A mm after the leading edge of the paper
activates the paper exit sensor.
A=setting value
[0 to 20 / 0 / 1mm /step]
The bridge junction gate solenoid turns off
A mm after the leading edge of the paper
activates the paper exit sensor.
A=setting value
[0 to 50 / 0 / 1mm /step]
[40 to 100/100/10%]