Figure 13: Leds On The Uplink Module Ports On The Sfp+ Uplink Module; Figure 14: Leds On The Uplink Module Ports On The Xfp Uplink Module; Table 7: Link/Activity Led On Network Ports In Ex3200 And Ex4200 - Juniper EX3200 Series Complete Hardware Manual

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches
Table 7: Link/Activity LED on Network Ports in EX3200 and EX4200 Switches
LED
Link/Activity
22

Figure 13: LEDs on the Uplink Module Ports on the SFP+ Uplink Module

Figure 14: LEDs on the Uplink Module Ports on the XFP Uplink Module

Port 0
The LEDs labeled Link/Activity LED in Figure 11 on page 21, Figure 12 on page 21, Figure
14 on page 22, and Figure 13 on page 22 indicate link activity. The LEDs labeled Status
LED in Figure 11 on page 21, Figure 12 on page 21, Figure 14 on page 22, and Figure 13 on
page 22 indicate the status of one of the four port parameters. The port parameters are
administrative status, duplex mode, Power over Ethernet (PoE) status, and speed.
Table 7 on page 22 describes the Link/Activity LED.
Color
Green
Status LED Status LED
Port 1
Link/Activity Link/Activity
LED LED
State and Description
Blinking—The port and the link are active, and there is link
activity.
On steadily—The port and the link are active, but there is no
link activity.
Off—The port is not active.
Copyright © 2010, Juniper Networks, Inc.