Accessible drives and LSD
12.3.2 Removing an accessible drive
Ê Remove all cables from the accessible drive see section
page
405.
Ê Press out on the locking latch to disengage the accessible drive locking bar
(see figure 198).
Ê Fold up the accessible drive locking bar.
Figure 201: Removing the accessible drive
Ê Carefully pull the accessible drive out of its installation bay (1).
Ê Close the locking bar (2) until it locks in place (3).
12.3.3 Installing accessible drive dummy covers
Ê If applicable, install the accessible dummy covers for the desired accessible
drive bay as described in section
on page
181.
286
"Installing accessible drive dummy covers"
Upgrade and Maintenance Manual
"Cabling plans" on
TX150 S8 / TX200 S7