Figure 433: Specifying Udp Destination Ports; Figure 434: Showing The Udp Destination Ports - Edge-Core ECS4620-28T Quick Start Manual

TFTP port 69
Web Interface
To specify UDP destination ports for forwarding:
1.
Click IP Service, UDP Helper, Forwarding.
2.
Select Add from the Action list.
3.
Enter a destination UDP port number for which service requests are to be
forwarded to a remote application server.
4.
Click Apply.

Figure 433: Specifying UDP Destination Ports

To show the configured UDP destination ports:
1.
Click IP Service, UDP Helper, Forwarding.
2.
Select Show from the Action list.

Figure 434: Showing the UDP Destination Ports

Specifying the
Use the IP Service > UDP Helper > Address page to specify the application server or
Target Server subnet (indicated by a directed broadcast address) to which designated UDP
broadcast packets are forwarded.
or Subnet
Command Usage
◆
Up to 20 helper addresses can be specified.
◆
To forward UDP packets with the UDP helper, the clients must be connected to
the selected interface, and the interface configured with an IP address.
– 661 –
Chapter 16
| IP Services
Forwarding UDP Service Requests