Honda 2006 TRX680FA Service Manual page 405

REAR WHEEL /SUSPENSION
SUSPENSION ARM INSTALLATION
STABILIZER ARM AND LINK
Insta ll the stabilizer arm and bushings with the arm
holders so the rounded side of the bushings are
toward the frame.
Tighten th e fo ur hol de r bolts alternately .
Insrll/I'Mth
thl! Inst all t he stabi lizer li nks w it h new nuts and tighten
ShOft
evesae
m fO
the m.
the Slilb,li,er arm.
• - - . . BUSHIN GS
j
X
O.5mm
/
'
I ~ DUST
SEAL
$"
_~
DUS T SEA LS CAPS
COLLAR
c~
lOWER ARM
Install new d ust seals w ith the lip side faci ng cut r - -- - - - - - -- -
u nt il the depth from the bushin g end is 0.5 mm (0.02
in ).
A pply gre ase to the p ivot bushin gs in the low er arm
and install the pivot collar.
A pp ly gr ease t o th e seal lip s and install t he seal
caps ov er the d usl seals securely .
Install t he lower arm into th e fra me. A lig n th e bolt
'-=:::::;::::;:::;=-~;;;;;;;;;;;;;;;;:=:=;:::~
hole s in the fram e an d arm, a nd insert the pivot boll
f rom t he rear side.
Inst all a new pivot nut .
l OWER ARM
16-15