Honda 2006 TRX680FA Service Manual page 393

REAR WHEEl/SUSPENSION
SERVICE INFORMATION
GENERAL
• This section covers service of the rear wheel and rear suspension.
• For tire information (page 15-11).
• For brake system service (page 17-2).
• For rear driving mechanism service (page 19·2}.
• A jack or other support is required to support the vehicle.
• Use genuine Honda replacement bolts and nuts for all suspension pivots and mounting points.
SPECIFICATIONS
ITEM STANDARD SERVICE LIMIT·
Minimum tire tread depth
4 mm (0.16 in)
Cold tire pressure
,
Standard 25 kPa (0.25 kgffcm
2
,
3.6 psi)
Minimum 22 kPa (0.22 kgffcm
I
3.2 pst}
)_ Maximum
28 kPa (0.28 kgffcm , 4.0 psi)
With cargo 25 kPa (0.25 kgf/cm , 3.6 psi) ;
TORQUE VALUES
Rear wheet nut
Rear wheel hub nut
Upper arm pivot nut (frame side)
Upper arm pivot nut (knuckle side)
Lower arm pivot nut
64 Nrn (6.5 kqf-rn, 47 lbf-ft}
137 Nun (14.0 kgf-m, 101 Ibf.ft)
34 Nru (3.5 kqt-m, 25 lof·ft)
54 Nm (5.5 kqf-rn, 40 Ibf·ft)
34
Nm
(3.5 kqf-rn, 25Ibf·ft)
Castle nut tighten to the specified
torque and further tighten until its
grooves aligns with the cotter pin
hole.
Lock nut: replace with a new one.
Lock nut: replace with a new one.
Lock nut: replace with a new one.
16-3