Honda 2006 TRX680FA Service Manual page 149

Hide thumbs Also See for 2006 TRX680FA:

Table of Contents

QUICK CONNECT FITTING

INSTALLATION

• Always replace the retainer of the quick connect

fitting and joint rubber when the fuel feed hose is

disconnected.

• If any retainer needs replacing, use the same

manufacture's

removed (The several manufactures feature dif-

ferent retainer specifications).

any damage or cut-out on the rubber cap,

replace it with a new one.

Do not bent or twist the fuel feed hose.

1. Insert a new retainer into the connector.

2. Set a new joint rubber to the fuel pipe as shown.

3. Align the quick connect fitting with the pipe and

align the new retainer locking pawls with the

connector grooves in the rubber lock piece.

Then press the quick connect fitting onto the

pipe until both retainer pawls lock with a

If it is hard to connect, put a small amount of

engine oil on the pipe end.

FUEL SYSTEM (PGM-FI)

Chapters

Table of Contents

2006 trx680fga