Honda 2006 TRX680FA Service Manual page 325

DRIVETRAIN SYSTEM
07ZAJ·RDJA110
peM 33P (GRAY) CONNECTOR
(Wire side of female terminal)
y
EOT SENSOR 2P(BLACKI CONNECTOR
(Wire side of female terminal)
B2
B28
3. EOT Sensor Open Circuit Inspection
Turn the ignition switch OFF.
Remove the jumper wire.
Disconnect the peM 33P (Gray) connector (page
6-54).
Check tor continuity between the peM 33P
(Gray) connector terminals and EeT sensor 2P
(Black) connector terminals of the wire harness
side.
TOOL:
Test probe
Connection: 828 - Yellow
82 - Green/red
Is there continuity?
YES - Replace the peM with a new one, and
recheck.
NO _. Open circuit in Yellow wire .
• Open circuit in Green/red wire.
14-43