Time Server Ip Address; Auto Clear - Xerox Versant 2100 Press System Administration Manual

Time Server IP Address

To use the NTP Time Synchronization feature, make sure to activate the feature by
setting it to on, and then follow the steps below to enter the IP address of the time
server.
Note
Your network adminstrator can supply the IP Address of the time server for you to enter.
1. Select Machine Clock/Timers.
2. From the Machine Clock/Timers screen, select Time Server Address and press Change
Settings.
3. Enter the IP address:
• IP Address: Set the IP address of the time server from which the time is obtained,
using values 0 to 255.
• Addresses 244 to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
• Select Next to enter the next part of the IP address if the address between dots
is less than 3 digits.
4. Select Save to save the settings and return to the previous window.
5. Select Close and, if needed, log off the Administrator mode.

Auto Clear

If a given time period elapses with no press activity, the press touch screen automatically
returns to the initial (default) screen. Set this option to On and select a time period
between 1 through 4 minutes, in intervals of 1 minute, after which the press will return
to its default screen.
Note
Even if Off is selected, any currently pending jobs continue processing after one minute
of inactivity on the press.
1. Select Machine Clock/Timers.
2. From the Machine Clock/Timers screen, select Auto Clear and select Change Settings.
3. Select Off or On.
4. If you selected On, select the time by using the arrows or the numeric keypad to enter
a numeric time.
5. Select Save to save the settings and return to the previous window.
6. Select Close and, if needed, log off Administrator mode.
Xerox ® Versant 2100 Press
System Administration Guide
Common Service Settings
6-5