2Ah Faulty Nvram Data - Xerox Phaser 6115MFP Service Manual

2AH Faulty NVRAM Data

Phaser 6115MFP Multifunction Product Service Manual
Incorrect data or faulty operation of the NVRAM.
Applicable Status Code
2AH: Faulty NVRAM Data
Initial Actions
If possible, print a test page.
Troubleshooting Reference Table
Applicable Parts
Engine Control Board,
PL4.19.15
Warning
To avoid the potential of electric shock, ensure the power to the printer is
off and the power cord is disconnected from the wall outlet prior to
performing steps beyond step 1 of the following troubleshooting
procedure.
Troubleshooting Procedure Table
Step Action and Questions
Turn the power switch OFF and ON.
1
Did this resolve the problem?
Check the NVRAM on the Engine Control
2
Board.
Was the NVRAM chip properly installed?
Error Codes and Messages
Wiring and Plug/Jack References
Engine Control Board to Solenoid and Sensor
Wiring (page 10-13)
Yes
Complete.
Replace the
Engine Control
Board
(page 8-57).
No
Go to Step 2.
Replace the
machine.
3-27