Devices Menu - Fujitsu PRIMERGY RX600 S3 User Manual

8.3.7 Devices Menu

Settings for devices are configured on the [Devices] menu.
Main Processor
Examine and set system parameters for built-in
Devices .
> IDE Controller
> Mass Storage
> LAN
> Video
> USB
> Serial Ports
> PCI
Item
IDE Controller
Enable Serial ATA
Primary Master
Mass Storage
Enable On-board SCSI
RAID Activation Key
LAN
Enable On-board NIC
Enable On-board NIC ROM
NIC 1 MAC Address
NIC 2 MAC Address
Video
Enable On-board Video
BIOS SETUP UTILITY
Memory Devices Server
Devices
table: Items on the Devices Menu
Settings
Configuration for IDE Controller
Enabled (unchangeable)
ICH Serial ATA Controller
Configuration for onboard SCSI array controller
Enabled (unchangeable)
Installed
Configuration for onboard LAN controller
• Enabled (initial value)
• Disabled
• Enabled (initial value)
• Disabled
The MAC address of the onboard LAN 1 is displayed.
The MAC address of the onboard LAN 2 is displayed.
Configuration for video controller
Enabled (unchangeable)
PRIMERGY RX600 S3 User's Guide
Security Save, Restore & Exit
Examine and set IDE controller parameters.
Esc = Exit
F9 = Reset to Defaults
F10 = Save and Exit
<Enter> = Select Entry
= Move Highlight
Set to enable the Serial ATA controller.
The device name of controller is displayed.
Set to enable the onboard SCSI array controller.
The information whether the onboard RAID
Activation Key is installed or not is displayed.
Set whether or not to enable the onboard LAN.
Set whether or not to enable the expansion
ROM with the onboard LAN.
Set to enable the onboard video controller.
Description
251
8