Table 1.48 Buttons On [Du#X] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Items
Vendor
Model
Capacity
RAID Card#
Logical Drives
Sensor#
Status
Raid Level
Physical Drives
assignment
Missing drives count
RAID Action Progress
Drive Type
Slot#/Sensor#
Action
Progress
Estimated time
remaining (hh:mm:ss)
Voltage
Sensor
Voltage
Threshold
Button
Status Clear Clears the error message of the disk unit
·
Failed
·
Hot Spare
·
Rebuilding
·
SMART err
·
Shielded
·
Bad Block
·
Not-present
The vender name of a physical drive is displayed.
The model name of a physical drive is displayed.
The capacity of a physical drive is displayed.
The slot number of RAID Card that connects a physical drive is displayed.
The sensor number of a logical drive is displayed.
The state of a logical drive is displayed.
The RAID level of a logical drive is displayed.
The slot number of a physical drive that composes a logical drive is displayed.
The number of physical drives missed to compose a logical drive at the RAID level
is displayed.
The drive type that the RAID action is executed is displayed.
·
Physical : Hardware RAID
·
Logical : Software RAID
Slot# from which the RAID action is executed is shown when Drive Type is
Physical, and Sensor# from which the RAID action is executed is shown when
Drive Type is Logical.
The RAID action under execution is displayed.
·
Rebuilding : It is shown for a physical drive to execute the rebuild of the RAID
drive.
·
MDC Running : It is shown for a logical drive to execute MDC(Make Data
Consistent).
The progress rate of the RAID action under execution is displayed by the
percentage.
The remainder time that will be expected by the time the RAID action under
execution is completed is displayed.
Displays the Voltage sensor type.
12V_DU_SLOT0
12V_DU_SLOT1
Displays the current power voltage.
Warning Lower and upper limits of the warning-level voltage.
(Low/High)
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.
Critical Lower and upper limits of the critical-level voltage.
(Low/High)
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.

TABLE 1.48 Buttons on [DU#x] Window

Description
Description