Adding Servers; Raid Group Creation - Fujitsu ETERNUS DX60 S3 Operation Manual

4. Component Expansion/Function Enhancement

Adding Servers

Adding Servers
To connect a new server to ETERNUS DX, preparation is required.

RAID Group Creation

Create RAID groups in order to create volumes to be used by the added server.
If free space in an existing RAID group is used, this procedure can be omitted.
The procedure to register a RAID group is as follows:
1
Click the [RAID Group] tab on the navigation of the ETERNUS Web GUI screen.
The [RAID Group] screen appears.
2
In [Action], click [Create].
The [Create RAID Group] screen appears.
3
Enter the name of the RAID group that is to be registered and select "Automatic" or "Manual" for "Create
Mode".
When "Automatic" is selected, the settings for "Automatic Setting" are displayed.
When "Manual" is selected, the settings for "Manual Setting" are displayed.
4
Set the required items and click the [Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6
Click the [Done] button.
The screen returns to the [RAID Group] screen.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
69
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0