Adding Toner & Replacing The Cleaning Pad; Adding Toner; Replacing The Cleaning Pad - Konica Minolta 1312 User Manual

Chapter 5 Maintenance
Adding Toner & Replacing the Cleaning Pad
When toner runs out, code [P25] displays in the Print quantity/
Magnification ratio window and the Add Toner lamp blinks.
In this case, replenish the developing unit with toner and also
replace the cleaning pad.

Adding Toner

See p. 2-7 to p. 2-9.

Replacing the Cleaning Pad

1. While holding the upper unit with one
hand, press the upper unit release
button to open the unit.
NOTES:
• Use care to prevent the upper
unit from popping up.
• Open the upper unit until it clicks.
2. Slide the cleaning pad to the rear,
then remove it while pulling up on the
front side.
5-4