Accessory Parts; Removing The Machine - Konica Minolta bizhub 162 Installation Manual

IV. Accessory Parts
No. Name
1. User's Guide*1
2. User's Guide (GDI printer controller)*1
3. Installation Manual (this manual)
4. Manual Holder
5. Seal
6. Size Label
7. Power Cord*1
8. Starter
9. CD-ROM (GDI & TWAIN Driver)*1
10. Original Cover*2
*1 Varies depending on the applicable marketing
area
*2 Not included in bizhub 210
V. Removing the Machine
1. Holding onto the portions shown in the illustra-
tion, remove the machine while maintaining a
level position.
Note:
Machine mass: 38 kg/83-3/4 lb
Make available collective manpower of an appro-
priate size for transporting the machine.
VI. Removing Protective Tape, Packing
and Other Shipping Materials
Q'ty
1. Remove the protective tape from different parts of
1
the machine.
1
1
1
1
1 set
1
1
1
1
2. Open the Right Door.
4686U083AA
E-3
4034U001AB
1171U013AA
4034U002AA