12
Adjusting the Starting Print Position for the Second Side
The starting print position at the left edge of the paper for the second side
during automatic double-sided copying for each paper drawer can be ad-
justed.
0 The starting print position is adjusted during manufacturing of the ma-
chine. Normally, this position will not need to be adjusted.
0 Only 8-1/2 × 11 v paper can be used to adjust the bypass tray.
1
Display the Administrator Setting screen.
–
For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting Screen" on page 12-45.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [3 Centering (Duplex 2nd Side)].
The Centering (Duplex 2nd Side) screen appears.
6
Touch the button for the paper drawer to be set.
7
Press the [Start] key.
A test pattern is printed.
12-52
Utility
cm4520