9
9.3
If print quality is deteriorated
Cleaning the Electrostatic Charger Wire
If the Electrostatic Charger Wire is dirty, streaks will appear though the printed images. If this occurs, follow
the procedure described below to clean the Electrostatic Charger Wire.
1
Open the Front Door.
2
Slowly pull out the Charger Cleaner as far as possible. Next,
slowly push in the charger-cleaning tool as far as possible.
Repeat the above operations three times.
3
Securely insert the Charger Cleaner, and then close the Front Door.
9-12
If print quality is deteriorated
VL3622c/VL2822c/VL2222c
9.3