Placing Originals On The Platen Glass; Sending Multiple Originals From The Platen Glass - Oce cm4520 User Manual

Transmission
3.2.2

Placing Originals on the Platen Glass

Use the platen glass for originals that cannot be placed in the ADF (such as
a book or thick/thin originals).

Placing Originals on the Platen Glass

1
Open the ADF.
2
Place the original FACE DOWN in the
left rear corner, aligning the edge with
the left measuring guide.
3
Gently close the ADF.
3.2.3

Sending Multiple Originals from the Platen Glass

Originals that cannot be sent with the ADF can be sent by using the platen
glass.

Sending Multiple Originals from the Platen Glass

1
If the FAX screen is not displayed, press [Fax] on the control panel to
open the FAX screen.
2
Select a destination.
3
Set the desired functions as necessary.
cm4520
3
3-7