Table of Contents
Advertisement
Panel Menus
To change this setting:
From the Configuration Menu, navigate to Panel Menus.
1.
Touch
2.
3.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.
Paper Prompts
This setting determines the input source to which the device will direct a change paper prompt. The device
displays paper prompts based on the size of the paper requested by the user, not on the paper type.
To change this setting:
From the Configuration Menu, navigate to Paper Prompts.
1.
Touch
2.
3.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.
PPDS Emulation
The value of the PPDS Emulation menu item determines if a device can recognize and use the PPDS
datastream.
To change this setting:
From the Configuration Menu, navigate to PPDS Emulation.
1.
Touch
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
Print Quality Pages
See
"PRINT TESTS" on page
REGISTRATION
The Registration menu enables users to:
•
•
•
By adjusting the Top Margin value, a user moves the top margin of all installed trays either up or down the page.
Increasing the Top Margin's value moves text down the page and widens the top margin; decreasing its value
moves text up the page and narrows the top margin. In either case, the entire image moves up or down the
page. Therefore, no compression or expansion of the image occurs to preserve the bottom margin. Each
increment of adjustment for the Top Margin corresponds to 1 scan at 300 dpi.
By adjusting a tray's Left Margin setting, a user moves that tray's left margin either to the right or to the left.
Increasing a tray's Left Margin value moves its left margin to the right; decreasing the value moves its left margin
to the left. In either case, the entire image moves left or right on the page. Therefore, no compression or
expansion of the image occurs to preserve the right margin. Each increment of adjustment for the Left Margin
corresponds to 1 pel at 300 dpi.
or
to change the setting.
or
to change the setting.
or
to change the setting.
3-25.
Adjust the Top Margin value used by all installed trays
Adjust each installed tray's Left Margin value
View how changing a margin's value has affected the device's overall registration
7558-xxx
Previous
Go Back
Diagnostic aids
3-13
Next
Advertisement
Table of Contents
