Disable Scanner; Paper Prompts - Lexmark MX81 Series Service Manual

13
Use the plus or minus to increase or decrease the settings value for horizontal adjust and top margin.
Note: Each button press moves the margin values one pixel in the respective direction.
14
Select Submit to accept the value.
15
Verify the changes by placing the print quick test page face down and selecting Copy Quick Test.
16
Repeat steps 13, 14, and 15 as needed.
To manually register the flatbed, perform the following steps:
1
In the Configuration Menu, select the Scanner Manual Registration menu item.
2
Select the Print Quick Test Page menu item.
3
To view and adjust the flatbed registration, place the quick test page into the flatbed.
4
Select the Copy Quick Test Page item.
5
After the quick test page copies, select Flatbed.
6
Use the plus or minus to increase or decrease the settings value for the left or top margin.
Note: Each button press moves the margin values one pixel in the respective direction.
7
Select Submit to accept the value.
8
Place the print quick test page on the flatbed and select Copy Quick Test.
9
Repeat steps 5 and 6 as needed.
10
To exit REGISTRATION select Back or Stop.

Disable scanner

This menu item is used to disable the MFP scanner if it is malfunctioning. The MFP must be powered off and on for the
new settings to take effect.
To change this setting:
1
Select Disable Scanner from the Configuration menu.
2
Scroll through the setting's other possible values. The settings are Enable, Disable, ADF disable.
3
To save the setting's new value, select Submit.
4
Select Submit to accept the value.

Paper Prompts

This controls which tray a change prompt is directed to when paper is sensed to be the wrong size.
Note: The value of "Action for Prompts" on page 259 may override the value of this setting.
Service menus
258
7463