Disable Scanner; Paper Prompts; Envelope Prompts - Lexmark MX610 Service Manual

Disable scanner

This menu item is used to disable the MFP scanner if it is malfunctioning. The MFP must be powered off and on for the
new settings to take effect.
To change this setting:
1
Select Disable Scanner from the Configuration menu.
2
Scroll through the setting's other possible values. The values are Enable, Disable, ADF disable.
3
To save the setting's new value, select Submit.

Paper Prompts

This controls which tray a change prompt is directed to when paper is sensed to be the wrong size.
Note: The value of "Action for Prompts" on page 208
To change this setting:
1
From the Configuration menu, navigate to Paper Prompts.
2
Select from the available options:
• Auto (default)
• Multi‑purpose Feeder
•
Manual Paper
3
Depending on the printer model, press OK or touch
menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input sources will receive
the change prompt. When set to a value other than Auto, the selected source always receives this type of prompt.

Envelope Prompts

This controls which tray a change prompt is directed to when the envelopes are sensed to be the wrong size.
Note: The value of "Action for Prompts" on page 208
To change this setting:
1
From the Configuration menu, navigate to Envelope Prompts.
2
Select from the available options:
• Auto (default)
•
Multi‑purpose Feeder
•
Manual Envelope
3
Depending on the printer model, press OK or touch
menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input sources will receive
the change prompt. When set to a value other than Auto, the selected source always receives this type of prompt.
may override the value of this setting.
to save the setting, or press X to return to the Configuration
may override the value of this setting.
to save the setting, or press X to return to the Configuration
Service menus
207
7016