NEC Univerge SV8100 Features And Specifications Manual page 1763

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Simple Mail Transport Protocol (SMTP), sends outgoing email messages to email boxes using

the voice messaging system. The Forward voice mail to the email system, Forward faxes to the

email system, Receive email notification of new fax/voice mail and Reply to email messages

via voice mail features use SMTP to send outgoing messages. SMTP can also be configured to

restrict the type of messages sent, such as only allowing SMTP mail to be sent to other users

on the same domain. Refer to your Exchange, Domino, or GroupWise documentation, or

consult your administrator on which settings work best for your organization.

The Expanded Schedule feature has the following conditions:

Requires Version 11.5.0.XX or higher UM8000 Mail software.

A maximum of 99 Custom Schedules are supported.

A maximum of nine time intervals per custom schedule are supported to set multiple day or

week and hour of day options.

If two time intervals within a customer schedule contradict each other the numerically lower

time interval is followed.

Constant Message Count requires SV8100 Version 3000 or higher software.

Constant Message Count is displayed on a telephone's display until another activity needs

the display (For instance, if a call is made or received on the telephone). To get the

message count to display again, the telephone needs to receive a new voice mail message

or call into the voice mailbox.

The CD-VM00 supports two media sizes: 2G with 110 Hours of recording time and 8G with

550 Hours of recording time.

Live Record does not work for monitored calls, conference calls or internal calls.

Audible tones are not provided to the multiline terminal when using Live Monitor, only visual

notifications are provided for incoming monitored calls.

The UM8000 Lite is only supported on a 2G drive.

Up to two ports of fax are supported when using the "Lite" version of UM8000.

Up to four ports of fax are supported when using the "Full" version of UM8000 on 2G or 8G

Fax on demand is not supported.

Fax server is not supported.

UM8000 Mail software Version 11.1.1.28 or higher is required to support fax features.

UM8000 Mail software Version 11.2.1.3 or higher is required to support the AMIS/PlusNet

(Networking) and text-to-speech (TTS) features.