Line Calculation - Offset Point - Leica GPS1200 Series Technical Reference Manual

COGO
37.7.2
Description
COGO line calculation
offset point step-by-
step

Line Calculation - Offset Point

The COGO line calculation offset point calculates the coordinates of a new point after input
of station and offset values in relation to a line.
Elements that must be known are
• coordinates of two points.
• offsets.
OR
• coordinates of one point.
• bearing and distance from one point.
• offsets.
The coordinates of the known points
• may be taken from the active job.
• may be measured during the COGO calculation.
• may be entered.
Line management is not available for COGO line calculations.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "37.2 Accessing COGO" to access COGO Line Calcula-
tions Input.
GPS1200 850
Refer to
chapter