Determine Coordinate System - General
Description of fields
Field
Option
<Default
Normal or One Pt
Method:>
Localistn
<Default
Onestep, Twostep
Transforma-
or Classic 3D
tion:>
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
FIX (F4) or ADJST (F4)
Available for Classic 3D page unless <Transf
Model:> is highlighted. To define which
parameters are computed or fixed in the
Classic 3D transformation. Refer to paragraph
"DET C SYS Configuration, Classic 3D page".
PAGE (F6)
To change to another page on this screen.
Description
Method used to determine the coordinate system.
The fields and pages available are different if
<Default Method: One Pt Localistn> is
selected. Refer to "38.3.2 Configuring Deter-
mine Coordinate System - One Point Localisa-
tion" for information on how to configure DET C
SYS using the one point localisation method.
The default transformation to be used when deter-
mining the coordinate system. Refer to "38.1 Over-
view".
934