Leica GPS1200 Series Technical Reference Manual page 1195

Survey - Auto Points
Field Option
<Min Height:> User input
<Stop Posi- User input
tion:>
<Stop Time:> User input
<Store:>
File (Pts Only)
DBX(Pnts&
Codes)
<Start Immediately
Logging:>
Controlled
Description
Available for <Log By: Dist or Ht>. The value for the
height difference before the next auto point is logged.
Available for <Log By: Stop & Go>. The maximum
distance within which the position is considered
stationary.
Available for <Log By: Stop & Go>. The time while
the position must be stationary until an auto point is
stored.
Changing this setting while auto points are
being logged stops the logging. It must then be
restarted.
Logs auto point to a measurement file. Point logging
at up to 20 Hz. Coding and logging of offset points is
not possible. Points cannot be displayed in MapView
or output via format files.
Logs auto points to the DB-X. Point logging at up to 1
Hz. Coding and logging of offset points is possible.
Points can be displayed in MapView or output via
format files.
Logging of auto points starts immediately when the
SURVEY screen is accessed.
Logging of auto points starts upon pressing START
(F1) on the Auto page in SURVEY.
GPS1200 1195