Leica GPS1200 Series Technical Reference Manual page 1049

Reference Line
SHIFT CONF (F2)
To configure the reference line/arc. Available
for OCUPY (F1) being displayed. Refer to
"41.3 Configuring Reference Line".
SHIFT CONEC (F3) and SHIFT DISCO (F3)
To dial the number of the reference station
configured in the active configuration set and
to hang up immediately after the survey is
completed. Available for OCUPY (F1) or
STORE (F1) being displayed and for real-time
devices of type digital cellular phone or
modem. Available for <Auto CONEC: No> in
CONFIGURE GSM Connection.
SHIFT INIT (F4)
To select an initilisation method and to force a
new initialisation. Available for OCUPY (F1) or
STORE (F1) being displayed and for configu-
ration sets allowing phase fixed solutions.
Refer to "44.6.2 Accessing Initialisation for
Real-Time Rover Operations".
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template
and the running point ID according to the ID
template. Refer to "19.1 ID Templates".
SHIFT QUIT (F6)
To exit Reference Line application program.
GPS1200 1049