COGO
Step
Description
9.
COGO Traverse Results, Plot page
An arrow points from the known point to the calculated COGO point.
SHIFT QUIT (F6) does not store the COGO point and exits COGO
calculations.
10.
STORE (F1) to store the result and return to COGO Traverse Input,
Input page.
For <Write Logfile: Yes> in COGO Configuration, Logfile page the
result is written to the logfile.
11.
Are more COGO traverse calculations to be made?
•
If yes, repeat steps 2. to 11.
•
If no, continue with step 12.
12.
SHIFT QUIT (F6) to exit COGO calculation.
GPS1200
Refer to
chapter
32.6
817