Leica GPS1200 Series Technical Reference Manual page 1035

Reference Line
Step Description
2. CONT (F1) to access REFLINE Choose Task & Reference Line,
Reference page.
3. REFLINE Choose Task & Reference Line, Reference page
Select <Ref to Use: Select from Job>.
4. Highlight <Ref Line:> or <Ref Arc:> and press ENTER to access
REFLINE Manage Reference XX.
5. NEW (F2) to access REFLINE New Reference XX, Input page.
6. REFLINE New Reference XX, Input page
<Ref ID:> The ID of the new reference line/arc.
The other fields available depend on the option chosen for <Task:>
in REFLINE Choose Task & Reference Line, Reference page and
<Method:> on this screen.
• For <Task: XX Line>
<Method:> The method by which the reference line will be
defined. <Method: 2 Points> uses two known points to define the
reference line. <Method: Pt/Brg/Dst/Grade> defines the refer-
ence line using a known point, a distance, a bearing and the
gradient of the line. <Method: Pt/Brg/Dst/ΔHt> is the same as
above but uses the difference in height instead of the gradient.
<Line Length:> Available for <Method: 2 Points>. The hori-
zontal grid distance between <Start Point:> and <End Point:> of
the line. ----- is displayed if the distance cannot be calculated.
GPS1200
Refer to
chapter
41.4.2
1035