Leica GPS1200 Series Technical Reference Manual page 948

Determine Coordinate System - Normal
Description of fields
Field Option
<Transfrm User input
Name:>
<Transfrm
Type:>
Onestep, Twostep
or Classic 3D
Output
<Height
Mode:>
Orthometric or
Ellipsoidal
Output
Next step
CONT (F1) continues to DET C SYS Step 2: Choose Parameters.
GPS1200
Description
A unique name for the transformation. The name may
be up to 16 characters in length and may include
spaces. If a coordinate system is being updated then
its name is displayed.
The type of transformation to be used when deter-
mining a coordinate system.
Available when determining a new coordinate
system.
Available when updating a coordinate system. The
transformation type shown is the same as the trans-
formation used in the existing system.
The height mode to be used in the determination of a
coordinate system.
Available when determining a new coordinate
system.
Available when updating a coordinate system. The
height mode shown is the same as the mode used in
the existing system.
948