Leica GPS1200 Series Technical Reference Manual page 509

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Field procedure step-

Config...\Interfaces... - General

The coordinates of points can be measured over the lake with the depth of the lake

at that point recorded as an annotation. Refer to "44 Survey - General" for infor-

mation on how to run a survey.

Because the depth sounder is streaming data, the depth measurement that is

stored with the point is the last measurement received by the receiver before the

point is stored. The point can be stored manually or automatically. Refer to "19.6

Point Occupation Settings" for information on how to configure <Auto STORE:>.

The coordinates of the points can be measured as auto points. Refer to "45 Survey - Auto

Points" for information on how to automatically log points.

Use STATUS ASCII Input - XX to view and check the ASCII data being input to the receiver.

Refer to "31.5.1 Real-Time Input".

Show Quick Links

Table of Contents