Stakeout
Step
Description
For <Height Check: Yes> in STAKEOUT Configuration, Checks
page, a check is made on the vertical coordinate distance from the
staked point to the point to be staked. If the configured difference limit
is exceeded, STAKEOUT Difference Limit Exceeded is accessed.
14.
When <Auto STORE: No> in CONFIGURE Point Occupation
Settings, STORE (F1) to store the point information.
15.
Are more heights to be staked?
•
If yes, move to the next position and repeat steps 8. to 15.
•
If no, continue with step 16.
16.
SHIFT QUIT (F6) to return to the screen from where STAKEOUT
Stakeout Begin was accessed.
GPS1200
Refer to
chapter
43.4.5
19.6.1
1143