Configuration of Devices
23.1.7
Typical uses
Hidden Point Measurement Devices
To measure
•
distances, using laser technology
to points which are not directly accessible by means of GPS, for example house corners or
trees. The measurements taken with hidden point measurement devices are directly trans-
ferred if the device is connected to the receiver. If the device is not connected, measurement
can be typed in manually to calculate the coordinates of a hidden point.
Example of use
Step
Description
1.
A receiver must be in <R-Time Mode: None> or <R-Time Mode: Rover>.
2.
A hidden point measurement device is connected to the receiver via cable.
3.
Hidden point measurements are configured and activated.
4.
Distances, angles and azimuths are measured to the hidden point with the hidden
point measurement device.
5.
The measurements are directly transferred to the receiver and displayed in the
appropriate fields.
Hidden point measurement devices can be connected in addition to any of the
other devices. They can be active at the same time. Changing of ports is not
required.
GPS1200
•
angles
570
•
azimuths