Leica GPS1200 Series Technical Reference Manual page 401

Config...\Survey Settings...
Field Option
<At Logging Output
Rate:>
<8+ satellites for:> User input
<7 satellites for:>
<6 satellites for:>
<5 satellites for:>
<4 satellites for:>
Next step
Step Description
1. CONT (F1) closes the screen.
2. CONT (F1) returns to the screen from where CONFIGURE Point Occupation
Settings was accessed.
Description
Displays the rate at which static raw observations are
logged as configured in CONFIGURE Logging of
Raw Obs.
Sets the required observation time depending on the
number of satellites available. Counting time starts
when OCUPY (F1) is pressed. The receiver stops
measuring when the set length of time for a certain
number of satellites is reached.
Should the number of available satellites change
during observation, the observations already
recorded will be taken into account. Refer to para-
graph "Observation time depending on the number of
satellites available".
GPS1200 401