Leica GPS1200 Series Technical Reference Manual page 1301

Volume Calculations
Description of fields
Field Option
<Point ID:> User input
<Antenna Ht:> User input
<3D CQ:> Output
Next step
ESC returns to VOLUMES Choose Task & Surface screen.
ESC again to return to VOLUMES Volume Calculations Menu from where this screen was
accessed.
Description
The identifier for manually occupied points. The
configured point ID template is used. The ID can be
changed in the following ways:
To start a new sequence of point ID's type over the
point ID.
For an individual point ID independent of the ID
template SHIFT INDIV (F5). SHIFT RUN (F5)
changes back to the next ID from the configured ID
template. Refer to "19.1 ID Templates".
The default antenna height as defined in the active
configuration set is suggested. Refer to "2 Antenna
Heights". Changing the antenna height here does not
update the default antenna height as defined in the
active configuration set. The changed antenna height
is used until the application program is exited.
The current 3D coordinate quality of the computed
position.
GPS1200 1301