Leica GPS1200 Series Technical Reference Manual page 1286

Survey Cross Section
Field procedure step-
by-step
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Set up all equipment as for a real-time operation.
2. Start the Survey Cross Section application program.
3. X-SECTION Begin
<Codelist:> The codelist containing the point codes TB1, BB1, BB2,
EB1, CL, EB2, BB3, BB4 and TB2 must be displayed.
Check the settings.
4. CONF (F2)
5. X-SECTION Configuration
<Method: ZigZag>
<Direction: Forward>
<Show Dist: Yes>
6. CONT (F1)
7. Have cross section templates been defined yet?
• If yes, continue with step 19.
• If no, continue with step 8.
8. OK (F4) to confirm the information message and to access X-
SECTION New Template.
9. X-SECTION New Template, General page
GPS1200 1286
Refer to
chapter
1
47.2
47.2
10.3
47.3
47.5.2